Computer Programming - Variables

Post By: Hanan Mannan
Contact Number: Pak (+92)-321-59-95-634
------------------------------------------------------

Computer Programming - Variables

This session will teach you another most important concept of computer programming which is calledvariables. Actually, variables are the names you give to computer memory locations which are used to store values in a computer program.

For example, assume you want to store two values 10 and 20 in your program and at later stage you want to use these two values. Let's see how you will do it, here are the following three simple steps:

• Create variables with appropriate names.
• Store your values in those two variables.
• Retrieve and use stored values from the variables.

Creating variables

Creating variables is also called declaring variables in C programming language. Different programming languages have different ways of creating variables inside your program. For example, C programming language has the following simple way of creating variables:

#include 

main()
{
   int a;
   int b;
}

Above program creates two variables, i.e., reserves two memory locations with names a and b. We created these variables using int keyword to specify variable data type which means we want to store integer values in these two variables. Similar way, you can create variables to store long, float, char or any other data type. For example:

/* variable to store long value */
long a;

/* variable to store float value */
float b;

You can create variables of similar type by putting them in a single line but separated by comma as follows:

#include 

main()
{
   int a, b;
}

Following are few important points to remember about variables:

• A variable name can hold a single type of value. For example, if variable a has been defined inttype, then it can store only integer.
• C programming language requires a variable creation, i.e., declaration before its usage in your program. You can not use a variable name in your program without creating it, though programming language like Python allows you to use a variable name without creating it.
• You can use a variable name only once inside your program. For example, if a variable a has been defined to store an integer value, then you can not define a again to store any other type of value.
• There are programming languages like Python, PHP, Perl, etc., which do not want you to specify data type at the time of creating variables. So you can store integer, float or long without specifying their data type.
• You can give any name to a variable like age, sex, salary, year1990 or anything else you like to give, but most of the programming languages allow to use only limited characters in their variables names. For now, I will suggest to use only a....z, A....Z, 0....9 in your variable names and start their names using alphabets only instead of digit.
• Almost none of the programming languages allow to start their variable names with a digit, so1990year will not be a valid variable name where as year1990 or ye1990ar are valid variable names.

Every programming language provides more rules related to variables and you will learn them when you will go in further detail of that programming language. But for now above rules are enough to proceed and let's see next section, which will teach you how to store values in defined variables.

Store values in variables

You have seen how we created variables in previous section. Now, let's store some values in those variables:

#include 

main()
{
   int a;
   int b;
   
   a = 10;
   b = 20;
}

Above program has two additional statements where we are storing 10 in variable a and 20 is being stored in variable b. Almost all the programming languages have similar way of storing values in variable where we keep variable name in the left hand side of an equal sign = and whatever value we want to store in the variable, we keep that value in the right hand side.

Now, we have completed two steps, first we created two variables and then we stored required values in those variables. Now variable a has value 10 and variable b has value 20. In other words we can say, when above program is executed, the memory location named a will hold 10 and memory location b will hold 20.

Access stored values in variables

If we do not make use of stored values in the variables then there is no point in creating variables and storing values in them. We know that above program has two variables a and b and they store values 10 and 20, respectively. So let's try to print the values stored in these two variables. Following is a C program, which prints the values stored in variables:

#include 

main()
{
   int a;
   int b;
   
   a = 10;
   b = 20;
   
   printf( "Value of a = %d\n", a );
   printf( "Value of b = %d\n", b );
   
}

When above program is executed, it produces the following result:

Value of a = 10
Value of b = 20

You must have seen printf() function in previous chapter where we had used it to print "Hello, World!". This time, we are using it to print the values of variables. We are making use of %d, which will be replaced with the values of given variable in printf() statements. We can print both values using a single printf() statement as follows:

#include 

main()
{
   int a;
   int b;
   
   a = 10;
   b = 20;
   
   printf( "Value of a = %d and value of b = %d\n", a, b );
}

When above program is executed, it produces the following result:

Value of a = 10 and value of b = 20

If you want to use float variable in C programming, then you will have to use %f instead of %d, and if you want to print a character value, then you will have to use %c. Similar way, different data types can be printed using different % and characters.

Variables in Java

Following is the equivalent program written in Java programming language. This program will create two variables a and b and very similar to C programming, then we assign 10 and 20 in these variables and finally print the values of the two variables in two ways:

public class DemoJava
{    
   public static void main(String []args) 
   {
   
      int a;
      int b;
   
      a = 10;
      b = 20;
   
      System.out.println("Value of a = " + a);
      System.out.println("Value of b = " + b); 
            
      System.out.println("Value of a = " + a + " and value of b = " + b);     
   }
}

Variables in Python

Following is the equivalent program written in Python. This program will create two variables a and b and same time assign 10 and 20 in those variables.

Python does not want you to specify data type at the time of variable creation and there is also no need of creating variable in advance before using it.

a = 10
b = 20
   
print "Value of a = ", a
print "Value of b = ", b

print "Value of a = ", a, " and value of b = ", b

Though you can use the following syntax in C and Java programming to declare variables and assign values at the same time:

#include 

main()
{
   int a = 10;
   int b = 20;
   
   printf( "Value of a = %d and value of b = %d\n", a, b );
}